Protocol Citation: Miguel Chuapoco, Sripriya Ravindra Kumar, Timothy F. Shay, Xinhong Chen, David Brown, Tatyana Dobreva, Qin Huang, Xiaozhe Ding, Yicheng Luo, Pétur H. Einarsson, Alon Greenbaum, Min J. Jang, Benjamin E. Deverman, Viviana Gradinaru 2023. Library tissue handling, viral DNA extraction, and NGS sample preparation. protocols.io https://dx.doi.org/10.17504/protocols.io.bp2l695zklqe/v2Version created by Miguel Chuapoco
License: This is an open access protocol distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited
Protocol status: Working
We use this protocol and it's working
Created: May 22, 2023
Last Modified: May 31, 2024
Protocol Integer ID: 82290
Keywords: ASAPCRN
Funders Acknowledgements:
Aligning Science Across Parkinson’s
Grant ID: ASAP-020495
Abstract
This protocol describes the procedure to isolate viral DNA from AAV-transfected tissue and prepare it for next-generation sequencing.
UltraPure Distilled Water Invitrogen - Thermo FisherCatalog #10977-015
Marmoset tissue extraction (library selections)
Marmoset tissue extraction (library selections)
Raise and house marmosets in compliance with your local Institutional Animal Care and Use Committee (IACUC) and ensure that all protocols and procedures have been approved by the appropriate ethical and regulatory committees.
Inject marmosets with desired dose of library (e.g. 2 x 1012 vector genomes of library) intravenously (e.g. via the femoral vein).
At four weeks post-injection, euthanize marmosets and perfuse with 1X phosphate buffered saline.
Flash freeze tissue (e.g. using 2-methylbutane chilled with dry ice). Separate the brain into coronal blocks and flash freeze the blocks. Store tissue at -80 ºC until ready for processing.
DNA Extraction
DNA Extraction
Add 100 mg tissue sample (brain, liver, or spinal cord) and 1 mL TRIzol reagentTRIzol ReagentThermo Fisher ScientificCatalog #15596026 to bead homogenizer tubes. Use prefilled tubes with 1.5 mm Zirconium beads or 2.8 mm stainless steel beads.
Samples can be stored at -20 ºC for up to year in TRIzol.
5m
Centrifuge the homogenizer tubes containing the TRIzol solution and homogenized tissue using the following parameters: 12000 x g, 4°C, 00:05:00. Transfer the supernatant to a new tube (microcentrifuge tube or similar).
Add 600 µL chloroform to each tube for every 1 mL TRIzol used for lysis, vortex briefly, and incubate for 00:03:00.
3m
Centrifuge 12000 x g, 4°C, 00:15:00 to separate the nucleic acid phase from the protein phase. Transfer the top aqueous phase to a new tube (approximately 500 µL aqueous phase)
Centrifuge 12000 x g, 4°C, 00:10:00 to pellet nucleic acids. Discard supernatant and wash pellet with 1 mL 75% ethanol. Centrifuge again 7500 x g, 4°C, 00:05:00 and discard supernatant.
15m
Air dry pellet and resuspend in 84 µL PCR clean water
UltraPure Distilled Water Invitrogen - Thermo FisherCatalog #10977-015
Remove RNA by digestion with 3 µL RNase cocktail and digest with 3 µL SmaI. Supplement reaction with 10 µL CutSmart. Incubate at Room temperature for 2-3 hours and 37 °C overnight.
SmaI - 2,000 unitsNew England BiolabsCatalog #R0141S
CutSmart Buffer - 5.0 mlNew England BiolabsCatalog #B7204S
Purify with Zymo DNA Clean & Concentrator - 5Zymo ResearchCatalog #D4014
Genome Recovery
Genome Recovery
30m 40s
30m 40s
Amplify the region around the diversified genome insertion by PCR with 25 cycles of 98 °C for 00:00:10, 60 °C for 00:00:30 and72 °C for 00:30:00 using Q5 High-Fidelity DNA Polymerase - 500 unitsNew England BiolabsCatalog #M0491L and 50% of the total extracted viral DNA as a template using primers XF (ACTCATCGACCAATACTTGTACTATCTCTCTAGAAC) and 588-R2lib-R (GTATTCCTTGGTTTTGAACCCAACCG).
30m 40s
Index addition
Index addition
1m 40s
1m 40s
Dilute PCR product 1:100 and use as template for an additional round of PCR amplification around the variable region with primers containing Read1 and Read2 sequences by 10 cycles of 98 °C for 00:00:10, 59 °C for 00:00:30, and 72 °C for 00:00:10 using Q5 High-Fidelity DNA Polymerase - 500 unitsNew England BiolabsCatalog #M0491L and primers 588i-lib-PCR1-6bpUID-F (CACTCATCGACCAATACTTGTACTATCTCTCT) and 588i-lib-PCR1-R (GTATTCCTTGGTTTTGAACCCAACCG).
50s
Purify with Zymo DNA Clean & Concentrator - 5Zymo ResearchCatalog #D4014
Append Illumina flow cell adapters and unique indices by PCR amplification with NEBNext Multiplex Oligos for Illumina (Dual Index Primers Set 1) - 96 rxnsNew England BiolabsCatalog #E7600S
by 10 cycles of 98 °C for 00:00:10, 59 °C for 00:00:30, and 72 °C for 00:00:10 using Q5 High-Fidelity DNA Polymerase - 500 unitsNew England BiolabsCatalog #M0491L
50s
Clean up and validation
Clean up and validation
Run PCR products on a freshly-prepared 2% UltraPure™ Low Melting Point AgaroseThermo Fisher ScientificCatalog #16520050 gel.
Verify the expected size of the band and extract from the gel.
If desired, verify the nucleotide diversity at the randomized insertion site by Sanger sequencing.
Note
If additional material is needed for Sanger sequencing, perform an additional PCR amplification using 15-20 cycles of 98 °C for 00:00:10, 60 °C for 00:00:30 and72 °C for 00:00:10 with primers NGS-QC-F (AATGATACGGCGACCACCGAG) and NGS-QC-R (CAAGCAGAAGACGGCATACGA).